FLEX24-10G

Overview

Flex24-10G

The NVT Phybridge FLEX24-10G switch is the most versatile Power over Ethernet (PoE) switch on the market, designed to make IP/IoT deployments simple, secure, and cost-effective. The FLEX24-10G switch delivers up to 50 Watts of power (PoE++) and 10/100/1000 Mbps symmetrical, full-duplex, over 2 or 4 pair UTP (unshielded twisted pairs) cabling with up to 2,000ft (610m) reach.

The FLEX24-10G switch enables Modern LAN principles and comes standard with 2 x SFP+ 10Gb uplink ports, dedicated management and console ports,  24 x 10/100/1000 downlink ports, a 1,000 Watt hot-swappable power supply, power-sharing, and power redundancy. The FLEX24-10G switch also comes with a new and intuitive GUI interface, ideal for any cloud or premise-based managed service offering. The new and improved CLI (Command Line Interface) is very similar to the Cisco offering for ease of use.

Tech Specs

Technical Specifications

ModelFLEX24-10G
Part NumberNV-FLX-024-10G
Dimensions19 inches x 1U without rack ears:
  • 1.73” x 17.13” x 10.45” (HxWxD)
  • 4.39cm x 43.51cm x 26.54cm (HxWxD)
Weight7.35 lb. (3.33 kg)
MountingStandalone, rack or shelf-mountable; 2 brackets included for installation
ProcessorMIPS32 24KEc, 500MHz
Interface:

Ethernet Uplink

Maximum 2 uplinks, each 10Gb/s (full-duplex):

2 SFP+ ports: 1000 Base-T/TX/SX/LX/EX/ZX, 10GBase-T/CU/SR/LR/ER/ZR (determined by SFP or SFP+ transceiver module installed), Ethernet IEEE 802.3z, fiber optic cable/UTP

Interface:

Downlink (PoE and IP to Adapter)

24 x RJ45 Jacks

Speed: 10/100/1000Mb/s (full-duplex)

PoE Power:  50 Watts Maximum per port

Maximum Distance:

Standard Mode

Cable: CAT5e or better

Data Rate: 10/100/1000Mbps

Reach: 328ft (100m)

Long Reach Mode

Cable: 1 – 4 pairs UTP

Data Rate: 10/100Mbps

Reach: 2,000ft (610m)

Note: Single-Pair requires local power.

Management1 LAN port (MGMT): RJ45, 10/100/1000 Base-T auto-sensing, IEEE 802.3

1 RS-232 console port: RJ45 to DB9 cable

Power SupplyHot-swappable Power Supply Unit

Auto-sensing 100-240VAC, 50/60 Hz

Power Output1000W max at 100VAC

1000W max at 240VAC

Power Consumption20W
Power Injection (PoE)DC voltage: 48VDC to 58VDC

IEEE 802.3af/at

PowerWISE® Power Sharing2 male connectors (rear)

DC IN and DC OUT: 48VDC to 58VDC

Operating

Temperature

14°F to 113°F (-10°C to 45°C)
Humidity10% to 95% (non-condensing) at 95°F (35°C)
MTBF20 years

Extended Technical Specifications

Layer 2 Features
  • High performance Store and Forward architecture, runt/CRC filtering that eliminates erroneous packets to optimize the network bandwidth
  • VLANs
    • IEEE 802.1Q tagged VLAN
    • Maximum 4095 VLANs per switch
    •  MAC-Based VLANs
    • Voice VLANs
    •  VLAN Translation
    • Private VLAN and Port Isolation
    • DDMI
    • Multicast VLAN
  • Spanning Tree Protocol
    • STP (Spanning Tree Protocol)
    • RSTP (Rapid Spanning Tree Protocol)
    • MSTP (Multiple Spanning Tree Protocol)
  • Loop Protection
  • UDLD (Unidirectional Link Detection)
  • Link Aggregation
    • Ether-channel (static trunk)
    •  LACP (Link Aggregation Control Protocol)
  • Jumbo Frames
    • Max 4K size @ 610m
    • Max 10K size @ 100m
  • Automatic Media-Dependent Interface Crossover (MDIX)
  • IPv4/IPv6 Transport
  • MLD Snooping
  • Layer 2 Access Control Lists
  • ARP Inspection
  • 802.1x port-based authentication
  • sFlow
  • MVRP/GVRP
  • Quality of Service (QoS)
Layer 3 Features
  • Layer 3 Routing, Inter-VLAN routing
  • Layer 3 Access Control Lists
  • DHCP Server Functionality
  • IP-Based VLANs
  • IPv4/IPv6 Source Guard
  • Quality of Service (QoS)
Layer 4 Features
  • Protocol-Based VLANs
Multicast
  • IGMP snooping v1, v2, and v3
Security
  • Authentication, Authorization, and Accounting (AAA)
    • Built-in RADIUS client to co-operate with the RADIUS servers.
    • RADIUS / TACACS+ login user access authentication.
  • Remote Monitoring (RMON)
  • MAC Security
    • Static MAC locking per port
  • SSH / SSL
Management
  • Management interface
    • Web GUI switch management (HTTPS is supported)
    • Command line interface (CLI)
    •  Serial console port
    • SNMP v1, v2c, v3
    •  SSH support
  • Multi-Switch management software is available.
  • User privilege levels control.
  • Built-in FTP, SFTP, SCP, and TFTP clients to backup configuration files.
  • System maintenance
    • Firmware upload via FTP or GUI.
    •  Configuration upload/download through Web interface.
    • Hardware reset button for system reboot or reset to factory default.
  • Network Time Protocol (NTP)
  • Link Layer Discovery Protocol (LLDP)
  • Link Layer Discovery Protocol Media Endpoint Discovery (LLDP-MED)
  • SNMP trap for interface linkup and linkdown notification.
  • Event message logging to remote Syslog server.
Power & Distance Table

Speed, Reach and Power

FLEX24-10G switch delivers Gigabit speeds to standard reach and 10/100Mbps symmetrical (full-duplex) and PoE++ (50W) over 4-pair UTP or PoE+ (30W) over 2-pair UTP with 2,000ft (610m) reach. It is designed to support the most demanding IP endpoints with plenty of bandwidth to spare. The FLEX24-10G switch provides robust network performance at any distance.

Industry Leading PowerWISE® Technology

The NVT Phybridge FLEX24-10G switch is built with PowerWISE® Technology, providing power sharing for redundancy, hot-swappable power supply, and auto-sensing 100-240 VAC delivering 1,000 watts of power. The FLEX24-10G switch is one of the most energy efficient switches on the market, consuming 20 Watts of power to operate.

Benefits Include:

  • Accelerate your return on investment by reducing infrastructure costs.
  • Simplify your IP modernization, collapsing planning and deployment time.
  • Eliminate infrastructure barriers, risks, disruption, and costs.
  • Create a robust, secure IP platform that is easy to deploy and manage.
  • Be environmentally responsible during your IP upgrades.

Security, Supporting Zero Trust Requirements

  • 802.1x port-based authentication, with supported FLEX adapter only*
  • MAC security – static MAC locking per port
  • Authentication, Authorization, and Accounting (AAA) with TACACS+ or RADIUS
  • Remote monitoring
  • SSH/SSL
  • Multi-level user privilege controls
  • Multi-layer access control lists

Resources

FLEX24-10G Pairing Adapters

FLEX24-10G Accessories

Scroll to Top