PoLRE24/48
Overview
The PoLRE24/48 managed switch makes the modernization to IP devices (IoT) simple, secure and cost-effective. When paired with the PhyLink Adapter, this powerful enterprise-grade switch delivers Ethernet and PoE over single-pair UTP cable with up to 1,200ft (365m) reach – that’s 4Xs the reach of standard Ethernet switches. The PoLRE24/48 comes standard with robust power management capabilities and an industry leading, simple to use GUI interface.
With the PoLRE24/48, customers are taking full advantage of Modern LAN principles, protecting existing infrastructure assets and eliminating any need to rip and replace the established Single-Pair UTP cabling. The PoLRE24/48 managed switch optimizes network design with advanced interoperability and easy integration into the overall LAN creating a secure, robust and easy to manage path for IP endpoints.
Tech Specs
Technical Specifications
| Model | PoLRE24 & PoLRE48 |
| Part Numbers | NV-PL-024 & NV-PL-048 NV-PL-024-1X & NV-PL-048-1X |
| Dimensions | 19 inches (48.26cm) x 1U without rack ears:
|
| Weight | Weight 7.94 lb (3.6 kg) |
| Mounting | Standalone, rack or shelf-mountable; 2 brackets included for installation |
| Processor | Broadcom BCM56018 switch processor, 266MHz |
| Memory | 32MB FLASH, 64MB DDR SDRAM |
| Interface: Ethernet Uplink (Trunk IP) | Maximum 2 uplinks, each 1Gb/s (full duplex), either:
|
| Interface: Downlink (PoE and IP to Adapter) | PoLRE24: 1 RJ21 male telco connector (standard), 24 pairs used PoLRE48: 2 RJ21 male telco connectors (standard), 48 pairs used Maximum Distance: 1200ft (365m) over CAT3 UTP cable, 24 AWG Speed: 10 Mbps (full duplex) Power: 22 Watts |
| Management | 1 LAN port (MGMT): RJ45, 10/100 Base-T auto-sensing, IEEE 802.3 1 UART console port: RJ45 to DB9 cable |
| Power Supply | Unit auto-sensing 100-240VAC, 50/60 Hz Power output: 500W max at 100VAC, 1000W max at 240VAC |
| Power Consumption | PoLRE24: 34.5W | PoLRE48: 40W |
| Power Injection (PoE) | DC voltage: 48VDC-56VDC ; Endpoint devices must be compliant with IEEE 802.3af |
| PowerWISE® Power Sharing | 2 male connectors (rear), DC IN and DC OUT: 48VDC to 56VDC |
| Operating Temperature | 14°F to 122°F (-10°C to 50°C) *Minimum ambient temperature for cold start-up is 32°F |
| Humidity | 10% to 95% (non-condensing) at 95°F (35°C) |
Extended Technical Specifications
Layer 2 Features |
|
| Multicast | Supports IGMP snooping v2 and v3 |
| Security |
|
| Management |
|
Power & Distance Table
Speed, Reach and Power
PoLRE24/48 delivers 10 Mbps symmetrical (full duplex) and PoE over Single-Pair UTP cable with up to 1,200ft (365m) reach. It is designed to support the most demanding IP endpoints with plenty of bandwidth to spare. No speed degradation with longer distance.
Industry Leading PowerWISE® Technology
Power sharing for redundancy, load balancing, AC/DC options, hot swappable power supply and auto-sensing 100-240 VAC delivering 500 to 1,000 watts of power. PoLRE is one of the most energy efficient switches on the market, consuming less than 17 Watts of power to operate.
Managed Switch with Plug-and-Play Option
PoLRE24/48 can either operate in a transparent mode functioning as a bridge, allowing for plug-and-play deployment, or as a fully managed switch with high value features specifically designed for the security industry, including:
- Power management by port for easy reset of ports.
- Port MAC locking for higher security and peace of mind.
- Simple Network Manager, an intuitive Web GUI that makes managing the switch a breeze
- Accelerate your return on investment by reducing infrastructure costs.
- Simplify your IP modernization, collapsing planning and deployment time.
- Eliminate infrastructure barriers, risks, disruption, and costs.
- Create a robust plug-and-play IP platform that is easy to deploy and manage.
- Be environmentally responsible during your IP upgrades.
