EC - Base Extender
Overview
The NVT Phybridge EC-Base Extender Solution is designed to supercharge the downlink ports of a standard Ethernet switch, delivering 10/100Mbps symmetrical (full duplex) and PoE over Coax infrastructure with distances up to 6,000ft (1,830m). That’s 18X the reach of standard Ethernet switches, thus removing the costs and disruptions associated with multiple IDF closet requirements.
With the EC-Base Extender Solution, IP IoT devices can be connected to the existing Coax cabling infrastructure, delivering optimal performance while saving cost, time, and environmental e-waste. Furthermore, the cost savings realized by using the EC Extender Solution can enable system designers to transfer budget and resources towards higher-quality applications and IEEE-compliant IoT devices, including IP-enabled phones, cameras, access control, speakers, and even facilities lighting.
Tech Specs
Technical Specifications
| Model | EC-Base |
| Part Number | NV-ECLK-BSE |
| Dimensions | • 10.09cm x 5.03cm x 2.57cm (LxWxH); • 3.97” x 1.98” x 1.01” (LxWxH) |
| Weight | 108g (3.81oz.) |
| Interface: Network Infrastructure side (CLEER) | (1 BNC port: Coax cable (RG59, RG6, RG11) |
| Interface: IEEE Side (IP Device) | (For General/PoE Switch) 1 RJ45 port: supports negotiation with IEEE 802.3 af/at switches |
| Power Supply | PoE from standard PoE switch, or external power supply; maximum 50W if locally powered |
| Power Consumption | 1W |
| Operating Temperature | -58°F to +158°F (-50°C to +70°C) Tests conducted against international safety standard at maximum ambient temperatures of 60ºC at 30W and 55ºC at 50W |
| Humidity | 10% to 95% (non-condensing) at 35° C |
| Mean Time Before Failure (MTBF) | 20+ years |
| Rack Mount | Model NV-RMEXT
|
